12-48V DC Driver for Servo Motor (EBLDS3605-9)

The Integrated Robot Joint Module, AUV Motor, AUV Motor Driver is independently developed by our's own R&D team since we owning industry-leading core technology. We have a long-term plan for the business, and we're going to continue to operate on that basis, with the hope of receiving a good reputation in the industry. Our company's development is achieved through continuous research, investment, and technological innovation. Your satisfaction is our best reward. Our company makes full use of e-commerce, breaks through the original sales mode, improves the product standardization system.

Product introduction

1. Features

1. 1. DC servo driver can accept signal rapidly and Quick response.

DC servo driver can adapt to changing load conditions immediately.

High performance fast function ring is a part of DC servo driver.

Besides, DC servo driver can achieve a performance feedback with real time.

1. 2. Stable and compatible.

DSP processing task of DC servo driver is designed professional. Process information will be more reliable and stable.

Fully compatible with mainstream rotating and direct drive motors.

1. 3. Safe and reliable

DC servo driver is good deal with reduce noise and additional hardware requirements.

Over voltage, current and temperature monitoring provides higher reliability.

2. Application scenarios

Lots of machine can use universal Servo motor driver to control their wheel. Such as packaging equipment, laser processing equipment, robots, automatic production lines, textile, pharmaceutical and other fields, to meet the needs of different industries such as industry, scientific research, business, medical apparatus and so on. Widely used, stable quality, large quantity of goods.

3. Parameter table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Product details

5. Factory and qualification

6. Instructions and precautions

Precautions

1. Electric shock hazard, the equipment must be connected to the power supply under the condition of protective grounding

2. Avoid the risk of short circuit by placing the driver in a damp place.

3. Do not use in dusty places.

4. Wear electrostatic bracelet to prevent electrostatic breakdown.

5. Exposure to radiation environment will cause damage to product performance.

6. Store in indoor environment with temperature not more than 35 ℃, relative humidity not more than 75%, and no corrosive gas

Instructions for regular inspection

Detection before operation (control power not supplied)

Whether the control switch is in the off state.

Servo driver or external regenerative resistance shall not be set on combustible objects.

In order to avoid the failure of electromagnetic brake, please check whether the circuit that stops running immediately and cuts off the power supply is normal.

When the electronic instrument used near the servo driver is subject to electromagnetic interference, please use the instrument to reduce the electromagnetic interference.

Please make sure the applied voltage level of the driver is correct.

Pre operation test (control power supply supplied)

The cable of detector (encoder) shall be free from excessive stress. When the motor is running, pay attention to whether the connecting cable contacts with the parts to produce abrasion or pull phenomenon.

If the servo motor vibrates or the running sound is too loud, please contact the manufacturer.

Confirm whether the parameters are set correctly, and there may be unexpected actions according to different mechanical characteristics. Do not over extreme adjust the parameters.

When resetting the parameters, please make sure whether the driver is in the state of servo off, otherwise it will be the cause of the fault.

When the relay operates, if there is no contact sound or other abnormal sound, please contact the manufacturer.

Check whether the power indicator and LED display are abnormal.

Based on the concept of innovation, our company has the ability to design and develop 12-48V DC Driver for Servo Motor (EBLDS3605-9) products and micro-innovation by virtue of meticulous production technology, perfect management mode and quality management system. We welcome you to visit our company and factory. Please contact us now, you will find our expert experience and high quality grades will contribute to your business.

Hot Tags: universal servo motor driver, China, manufacturers, suppliers, wholesale, custom, high quality, Torque Sensor, Sanitation Disinfection Robot, Mobile Robot Components, Industrial Mecanum Wheel, Electric Brushless Motor, Robotic Motor