1kw AC Servo Motor 3phase Servo Drive Mdme102gcg

We are a manufacturer for UVD Robot, NightVision Patrolling Robot, 100mm Mecanum Wheel that you can always trust. Our company is equipped with a number of experienced management and R&D elites, so you can trust on our professional technology and skills. On today, we've got customers from all over the world.

 Parameter table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

3.Product details

4. Factory and qualification

5. Instructions and precautions      

 Fault reason: the command signal is not to the driver signal ground.            

Processing method: connect the command signal ground with the driver signal ground.           

 Fault: after power on, the LED of the driver is not on            Fault reason: the power supply voltage is too low, less than the minimum voltage requirements.            

Treatment: check and increase the power supply voltage.           

 Fault: when the motor rotates, the LED light flashes            

1. Fault reason: Hall phase error.            

Treatment: check whether the motor phase setting switch (60? / 120?) is correct. Most brushless motors have a 120? Phase difference.            

2. Fault cause: Hall sensor failure           

 Treatment method: detect the voltage of hall a, Hall B and Hall C when the motor rotates. The voltage should be between 5VDC and 0.            

Fault: LED remains red all the time           

 Cause of failure: there is a fault.            

Treatment method: cause: over voltage, under voltage, short circuit, overheating, driver forbidden, hall invalid.

In the use of servo system, can servo-on be used as the signal to control the motor off-line so as to directly rotate the motor shaft?            

Although the motor can be offline (in free state) when the srv-on signal is disconnected, do not use it to start or stop the motor. Frequent use of it may damage the drive. If the off-line function needs to be realized, the switch of control mode can be adopted: assuming that the servo system needs position control, the control mode selection parameter no02 can be set to 4, that is, the first mode is position control, and the second mode is torque control. Then C-mode is used to switch the control mode: in position control, the signal C-mode is opened to make the driver work in the first mode (i.e. position control); when it is necessary to be offline, the signal C-mode is closed to make the driver work in the second mode (i.e. torque control). Because the torque command input trqr is not connected, the motor output torque is zero, thus realizing offline.

We consistently execute our spirit of ''Innovation bringing progress, Highly-quality ensuring subsistence, Administration advertising and marketing gain, Credit history attracting buyers for 1kw AC Servo Motor 3phase Servo Drive Mdme102gcg. With the development of the times and the progress of the society, in order to make the products meet the new needs of development, our company always adheres to the development idea of 'enlighten new thinking and create a new century'. With the rigorous manufacturing process, advanced management concept, professional production team and the spirit of continuous development and innovation, our products are of high quality and low price, highly competitive in the market, and our products are widely spread in every corner of the world.

Hot Tags: ac servo drive, China, manufacturers, suppliers, wholesale, custom, high quality, Electric Brushless Motor, Portable Disinfection Robot, Wheeled Mobile Robot, Autonomy Patrol Security Robot, Xenon Disinfection Robot, Cooperative Robot