57mm ISO inner rotor Brushless DC Motor for Health Care FL57BL(S)

Our company has been adhering to the principle of seeking development through science and technology for many years and is always at the forefront of the Differential Wheel HUB Motor, Photosensor Module, ROV Motor Driver industry, which makes our products sell well both at home and abroad. We always pursue the management style of product quality is higher than everything else, and adhere to the principle of seeking truth and pragmatism and scientific and technological innovation. Our integrity, strength and product quality have been generally recognized by the industry fellows. Our company philosophy is the pursuit of excellence and sustainable operation. Under the guidance of the spirit of speed, punctuality and service, we continue to provide more considerate services, and always put the interests of customers first. We will spare no effort to offer more advanced technology, better products, more professional service and more timely support to our customers, and win a better future for ourselves through continuous innovation and development.

Product introduction

1. Product features

Main features of wheel hub motor:

1. 1. Brushless dc motor is higher integration: less overall structural parts, integrating power, transmission and braking

1. 2. High precision control: high speed response, precise positioning, anti-interference;

1. 3. No brush: stable operation, low operation noise, high efficiency and energy saving, long service life;

1. 4. Each wheel has a separate motor drive, which can realize four-wheel drive.

2. Application scenarios

The product can power all kinds of tires. For example, ship blade, mecanum wheel, crawler, etc., meet the needs of different industries such as industry, scientific research, commerce, medical treatment, etc., with wide application, stable quality and large shipment.

3. Parameter table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Product details

5. Factory and qualification

6. Instructions and precautions

Precautions

1. Electric shock hazard, the equipment must be connected to the power supply under the condition of protective grounding

2. Avoid the risk of short circuit by placing the brushless dc motorin a wet place

3. Avoid the sharp objects close to the stator winding to prevent the insulation layer from damage and short circuit of the motor.

4. Do not use in dusty places.

5. Ensure good lubrication when the motor is running. 6. There is abnormal noise when the motor is running without load. Please check the source of the noise.

6. Small metal objects shall not be stacked next to the brushless dc motorto avoid falling into the motor.

7. Do not use or store products in an environment where the pH range may cause corrosion or dissolution of products or packaging materials.

7. Common faults of servo motor

(1) Mechanical failure caused by servo motor operation. This kind of fault is caused by pulse encoder fault, pulse encoder cross shaft damage and speed generator fault.

(2) When the motor is powered on, it is very fast. This condition is commonly known as runaway. At this time, the common fault causes are whether the pulse encoder wiring is wrong, whether the pulse encoder coupling is damaged, and whether the terminal of the tachometer generator is connected reversely and whether the excitation signal wire is connected wrongly.

(3) The main axis of the equipment cannot be moved in the direction or not in place. This kind of fault is mostly caused by the circuit problems of the equipment, such as short circuit, loose terminal, encoder circuit.

(4) The axis feed oscillates when the motor is working. In this case, check the connection between motor coil, mechanical feed screw and motor, servo system, pulse encoder, coupling and tachometer.

(5) The device has a servo system alarm. This situation is complicated. It is necessary to check and find out the possible causes according to the situation: the main circuit fault and low feed speed; the pulse encoder is poor; the power supply voltage of the pulse encoder is too low (adjust the power supply 15V voltage so that the voltage value on the + 5V terminal of the main circuit board is within 4.95 ~ 5.10v); there is no one turn signal of the pulse encoder and the reference point cannot be executed normally Return.

We have always been adhering to the corporate philosophy of 'quality first' and 'perfect service', maintaining a leading level of professional technology, and continuously producing 57mm ISO inner rotor Brushless DC Motor for Health Care FL57BL(S) with excellent performance. We have now sophisticated machines. Therefore, we can meet different inquiries from different clients.

Hot Tags: brushless DC motor, China, manufacturers, suppliers, wholesale, custom, high quality, Military Patrol Robot, UV Bacteria Killing Robot, Magnetic Encoder, Mecanum Wheel, Delta Ac Servo Driver, Universal Mobile Robot