80mm Series 36V 48V 310V Servo DC Brushless Motor

On the basis of consolidating our brand, we have also researched and developed a variety of Mecanum Wheel Module, DC Servo Motor, Omnidirectional Mobile Robot in a timely manner according to market demand and user needs. The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. Since the establishment, our company has insisted on people-oriented and technology-based development, continuous innovation and improvement. We take measure at any expense to achieve essentially the most up-to-date equipment and approaches. We sincerely welcome you to check out our site and enterprise and send out us your inquiry.

Product introduction

1. Product features

Main features of wheel hub motor:

1. 1. DC servo motor is higher integration: less overall structural parts, integrating power, transmission and braking

1. 2. High precision control: high speed response, precise positioning, anti-interference;

1. 3. No brush: stable operation, low operation noise, high efficiency and energy saving, long service life;

1. 4. Each wheel has a separate motor drive, which can realize four-wheel drive.

2. Application scenarios

The product can power all kinds of tires. For example, ship blade, mecanum wheel, crawler, etc., meet the needs of different industries such as industry, scientific research, commerce, medical treatment, etc., with wide application, stable quality and large shipment.

3. Parameter table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Product details

5. Factory and qualification

6. Instructions and precautions

Precautions

1. Avoid the risk of short circuit by placing the differential wheel hub motorin a wet place

2. Avoid the sharp objects close to the stator winding to prevent the insulation layer from damage and short circuit of the motor.

3. Do not use in dusty places.

4. Ensure good lubrication when the motor is running. 6. There is abnormal noise when the motor is running without load. Please check the source of the noise.

5. Small metal objects shall not be stacked next to the DC servo motorto avoid falling into the motor.

6. Do not use or store products in an environment where the pH range may cause corrosion or dissolution of products or packaging materials.

Instructions for regular maintenance

1. Do not change the power supply voltage at will, for example, 4.8V for receiver, 6.0V for improving the performance of servo motor to avoid excessive load of servo motor and determine the torque according to the nature of work and the length of swing arm.

2. Make good use of the vibration proof washer to protect the servo motor. When installing the servo motor, do not lock it too tightly, resulting in the deformation of the vibration proof washer.

3. When replacing the servo motor gear, ceramic lubricating oil must be used. Do not use mineral lubricating oil to avoid deterioration and easy fracture of plastic gear.

4. If your servo motor does not have the function of waterproof and dustproof, please avoid water or dust running into the servo motor.

5. For the maintenance of the servo motor, it is necessary to note that when installing or removing the coupling parts to the shaft end of the servo motor, do not directly hit the shaft end with a hammer.

FAQ:

What is the fault condition of servo driver?

A：The servo motor will place a bearing on the drive side and a bearing on the non-drive side to connect and support the motor shaft. Among them, the drive side bearing needs to support the axial and / or radial load of external mechanical connection, usually with large size and shaft load. The ball bearing of servo motor needs double protection and permanent lubrication. It needs strict maintenance in normal use. As the main wear part of servo motor, more than half of the faults of servo motor are usually caused by bearings. The specific status quo is various, for example: when the motor is rotating, it produces jitter, abnormal noise, etc., and the motor shaft is stuck. If the bearing fault of servo motor is not handled in time, it will bring secondary damage. As the rusty debris of the bearing flies into the brake or motor encoder, it will cause more serious losses.

Faced with economic globalization, we are determined to become a leader in the 80mm Series 36V 48V 310V Servo DC Brushless Motor industry and surpass ourselves. We sincerely hope to cooperate with you, share success together, and forge ahead firmly to a more brilliant future. Our spirit is 'innovation is life, customer satisfaction is responsibility.' Serving every Chinese and foreign customers. We will give full play to our corporate advantages, continuously improving quality, comprehensively upgrading product technology and service levels.

Hot Tags: DC servo motor, China, manufacturers, suppliers, wholesale, custom, high quality, Magnetic Encoder, Mecanum Wheel Module, Medical Disinfection Robot, Xenon Disinfection Robot, Hyper Light Disinfection Robot, 36v Brushless Dc Motor