
Automatic Intelligent Sterilization Device Indoor Disinfection UVC Robot
Product Introduction
Let us build prosperous future hand in hand for UVD Robot, Mobile Compound Robot, Legged Mobile Robot. The company's staff will strive to provide you with high-quality pre-sale, sales and after-sales service, and work together with you to create a better future. We will pursue sustainable operation as the concept of enterprises. We will improve the treatment of employees and improve the quality of life as the driving force of enterprise development.
1、 Product features
1、UV + ultrasonic atomization + wet mop,medical grade disinfection / sterilization.
2、Zero corrosion on the ground, zero harm tohuman body.
3、Independent mobile, path planning, no deadcorner coverage of the environment.
4、Take the elevator independently to realizecross floor operation.
5、Automatic charging and drainage with littlemanual intervention
2、Product function
RoboCT uvc disinfection robot is specially designed for indoor commercial scenes, which can meet the needs of all-round medical disinfection and sterilization on the ground and facade. Based on the robot full scene mobile full stack technology, Chengtian cleaning and disinfection robot effectively integrates the UV disinfection and sterilization spotlight module, ultrasonic disinfectant atomization and spraying system, and wet drag dust pushing ground cleaning function. At the same time, the ladder control function endows it with the ability to travel freely between floors. The hydropower integration workstation realizes unlimited endurance for it, and reduces the manual intervention to the greatest extent. Medical level standard RoboCT uvc disinfection robot will meet your higher standard of environmental health and safety needs .
3、Application scenario
1、Medical institutions: isolation bed, operating room, waiting room、
2、Transportation hub: airport, railway station, bus station
3、Enterprise unit: office area, public area
4、Building area: Community Service Center, public corridor
5、Consumption place: Hotel, restaurant, KTV, shopping mall, cinema
4、Product parameters
| uvc disinfection robot | Ultrasonic atomization disinfection
module | ||
UV wavelength | 257.3nm | Number of atomizing cores | 10 |
Number of UV tubes | 4 | Service life of atomizing sheet | 4.5/L |
power | 36W | Maximum atomization amount | ≥5000h |
Irradiation intensity | ≥1200uW/㎡ | Working water level | 60~80 mm |
Basic characteristics of robot | |||
Cleaning efficiency | Up to 800㎡/h | Maximum climbing angle | 12° |
Cleaning width | 500mm | Rated brush disc motor power | 2 X 150 W |
Rated voltage | 24 V | Maximum pumping pressure | 8.18kpa |
maximum power | 1000W | Rated drive motor power | 2X300 W |
Endurance time | 3-6 h | Volume of clean / sewage tank | 24L/18L |
Travel speed | 0-3.6km/h | Rated pump motor power | 280 W |
Rotating speed of rotary table | Up to 270 RPM | Sensor configuration | Lidar, depth camera |
Running noise | 59-70 dB(A) | Ultrasonic sensor, electronic crash strip |
5、Intelligent supporting and security
1、Independent walking and obstacle avoidance Automatic identification and cleaning of stains.
2、Automatic detection of cleaning quality.
3、Water saving and environmental protection.
4、Hydropower monitoring, Automatic addition .
5、Intelligent voice.
6、Multi sensor fusion for obstacle avoidance.
6、Factory and qualification




7、 After sales service
1. Our company can provide installation, debugging and technical training for all our products.
2. After the installation and commissioning, the warranty period is one year (except for vulnerable parts and artificial damage), with a lifetime warranty.
3. Irregular on-site maintenance, on-site operation and technical training.
4. After sales contact: 0571-89167832.
5. Service content: in case of equipment failure, first communicate by phone. If the problem cannot be solved, our company will rush to the site as soon as possible to solve the problem. After sales service includes not only equipment maintenance, but also technical support. Our technicians can carry out on-site technical training and provide a complete set of solutions. Professional and technical personnel shall follow up the use of user's equipment at any time.
Our products have been selling well for many years in a row, and our company as a professional manufacturer of Automatic Intelligent Sterilization Device Indoor Disinfection UVC Robot is recognized by the industry and society. We sincerely hope to cooperate with more customers and welcome them to visit the factory. We are confident to build our company into a first-class enterprise with advanced management standards, strong competitiveness and sustainable development.
Hot Tags: uvc disinfection robot, China, manufacturers, suppliers, wholesale, custom, high quality, Mobile Compound Robot, Torque Sensor, Amr Automated Mobile Robot, Mecanum Omni Wheel, Mobile Robot Components, Industrial Mecanum Wheel
[[ProKeywords]]SPEC DATA
Send Inquiry