+8613606539281
High Power 24V 3000rpm 700W Electrical Servo DC Brushless Motor for Medical Equipment

High Power 24V 3000rpm 700W Electrical Servo DC Brushless Motor for Medical Equipment

It can provide power for various machines. For example, ship blade, Mecanum wheel, crawler, etc., meet the needs of different industries such as industry, scientific research, commerce, medical treatment, etc
Send Inquiry
Product Details of High Power 24V 3000rpm 700W Electrical Servo DC Brushless Motor for Medical Equipment

Product Introduction

Facing the market demand of different customers at home and abroad, we combine the experience of the same trade, constantly push the old and bring forth the new and perfectly realize the upgrading of series Autonomous Robot Platform, Wheeled Mobile Robot, Built In Temperature Sensor. Our company's development is based on the market, and we provide high-quality, efficient, and dedicated service to customers abroad. We carry out perfect testing methods, quick and thoughtful pre-sales and after-sales services.

Product introduction

1

1. Product features

Main features:

1. 1. High integration: less overall structural parts, integrating power, transmission and braking

1. 2. High precision control: high speed response, precise positioning, anti-interference;

1. 3. No brush: stable operation, low operation noise, high efficiency and energy saving, long service life;

1. 4. Each wheel has a separate motor drive, which can realize four-wheel drive.


2. Application scenarios

It can provide power for various machines. For example, ship blade, Mecanum wheel, crawler, etc., meet the needs of different industries such as industry, scientific research, commerce, medical treatment, etc., with wide application, stable quality and large shipment.


3. Parameter table


Serial numbe

Model

JA110 joint motor

1

mm

external diameter

115

2

mm

length

49

3

Nm

Rated pitch

2.5

4

rpm

Rated speed

1050

5

%

efficiency

89

6

W

Motor power

280

7

A

Rated current

7.9

8

VDC

Rated voltage

24-48



The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.


4. Product details

image003 image006(001) image007


5. Factory and qualification

mobilelogisticsrobot4

mobilelogisticsrobot5

mobilelogisticsrobot6

mobilelogisticsrobot7


6. Instructions and precautions

Precautions

1. Electric shock hazard, the equipment must be connected to the power supply under the condition of protective grounding

2. Avoid the risk of short circuit by placing the hub motor in a wet place.

3. Avoid the sharp objects close to the stator winding to prevent the insulation layer from damage and short circuit of the motor.

4. Do not use in dusty places.

5. Ensure good lubrication when the motor is running.

6. There is abnormal noise when the motor is running without load. Please check the source of the noise.

7. Small metal objects shall not be stacked next to the hub motor to avoid falling into the motor.

8. Do not use or store products in an environment where the pH range may cause corrosion or dissolution of products or packaging materials.

9. Do not use the product in halogen gas environment. Even a small amount of halogen gas, such as chlorine in the air or metal parts used for packaging, can cause corrosion. At the same time, do not use any resin that will release halogen gas.

10. Store in an indoor environment with temperature no more than 35 ℃, relative humidity no more than 90%, and no corrosive gas.

Instructions for regular maintenance

1. Do not change the power supply voltage at will

2. Make good use of anti vibration washer to protect dc brushless servo motor

3. Non-professionals do not open the cover and disassemble, to avoid the expansion of the fault, secondary maintenance

4. Please avoid water or dust running into the dc brushless servo motor.


7. QAF:

Q: Is the servomotor of every joint the same for industrial robots?

A; No, motors used in robot joints require maximum power mass ratio and torque inertia ratio, high starting torque, low inertia and a wide and smooth speed regulation range. Especially, the robot end actuator (gripper) should adopt the motor with the smallest volume and mass, especially when it requires fast response, the servo motor must have high reliability and large short-time overload capacity.


Our High Power 24V 3000rpm 700W Electrical Servo DC Brushless Motor for Medical Equipment have always been to create value for customers as the goal, we constantly strive for improvement in technology so as to produce high-quality, low-cost products for customers. We adhere to the principle of 'serving customers and stable product', constantly absorbing the advantages of similar products at home and abroad, and strive to satisfy customers in terms of quality, so that products can better meet market needs. Start benefiting from our comprehensive services by contacting us today.

Hot Tags: DC brushless servo motor, China, manufacturers, suppliers, wholesale, custom, high quality, Disinfection Robot For Room, Hyper Light Disinfection Robot, Automatically Checks Patrol Robot, Small AGV Robot, Intelligent Inspection Robot, Mobile Security Robot

[[ProKeywords]]

SPEC DATA

Send Inquiry

Send a Message