Pipe Inspection Videoscope Camera with 23mm Camera Lens, 7'' LCD and 20m Testing Cable

We will face the opportunities and challenges brought about by the internationalization strategy with a positive and open mind, and continue to focus on the development and innovation of Mecanum Omni Wheel, Rotary Incremental Encoder, 100mm Mecanum Wheel. Also you will get high quality products and excellent service here! Over the years, our technicians have continued to research and innovate on forging machine tools, spare no effort in sales and after-sales service, and do their best to meet the needs of customers at home and abroad. Through reform and innovation, we will continue to forge ahead and promote the development of the enterprise itself, so that the enterprise will remain invincible in the market competition of survival of the fittest.

Product introduction of inspection robot

1. Product features

1. 1. Inspection robot High degree of automation: the circuit can be designed by the computer or the induction magnetic strip of the magnetic air sensor can guide the passage and automatically charge;

1. 2. Inspection robot Stable operation, stable parking, no vibration and noise;

1. 3. Inspection robot Improve the corporate image: AGV has a futuristic appearance, beautiful appearance and high observability;

1. 4. It has the functions of intelligent tracking, alarm, intercom, speed change, obstacle avoidance, etc.;

1. 5. Inspection robot High work efficiency: no manual management is needed to improve the efficiency of the enterprise;

1. 6. You can choose whether to configure the latent AGV or not in the inspection robot.

2. Application scenarios

As a branch of dangerous operation robot, inspection robot is mainly used in automatic chemical plant, mine and other places with certain danger.

3. Parameter Table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Factory and qualification

5. Instructions and precautions

Precautions

1. The inspection robot is limited to driving on flat ground, please keep away from the steps.

2. When cleaning and maintaining the equipment, please disconnect the power supply first.

3. It is strictly forbidden for non-professionals to dismantle the machine

4. When using, do not cover the lens with cloth or other covers to prevent poor heat dissipation of the machine.

Instructions for regular maintenance

1. Before each start-up, the sundries within the operation range of the machine shall be removed with an air gun, the power shall be connected, the machine shall be started, and the operation condition of the machine shall be checked.

2. If the machine is not used for a long time, please wipe it clean and put it in a dry and ventilated environment. Do not store it in a place with high temperature and humidity.

3. Warm water or neutral detergent should be used for cleaning. Do not use gasoline, benzene or other chemical reagents. Wipe or air dry after cleaning.

4. Check whether the front and rear wheel parts are normal or whether there is abnormal sound every week

6. FAQ

What kind of Warning measures do you have in mobile security robot?

A: 1. Panoramic temperature measurement technology for internal equipment of switchgear

In the process of inspection, the inspection robot can read the temperature distribution data inside the installed switch cabinet and distribution cabinet in real time, realize the purpose of monitoring the working temperature status of all equipment, and fully grasp the working status of all equipment.

Partial discharge monitoring technology in the cabinet

The system uses the mechanical arm type partial discharge detector to detect the internal discharge phenomenon of all switch cabinets and distribution cabinets. Combined with the travel of the robot in the vertical direction of 2 meters and the travel of the partial discharge mechanical arm in the horizontal direction of 0.25 meters, it can realize the omni-directional partial discharge monitoring of switch cabinets and distribution cabinets.

Exception warning and linkage alarm handling

According to the operation conditions of power distribution room and switch room, alarms can occur according to different levels: robot local acousto-optic early warning, monitoring center acousto-optic early warning. When the environment gas reaches the alarm parameters, the fire and water are abnormal, the inspection point equipment is abnormal, the geological change, communication system failure, robot disconnection for 30 minutes and other abnormal conditions occur, the system will give an alarm. When the staff confirms the alarm information, the system can release the relevant alarm.

Fire detection and emergency treatment

Detect the abnormal light source and smoke in the distribution room and switch room through the high-definition video equipment carried by the inspection robot; identify the fire source by the infrared equipment, detect the open fire of the distribution room and switch room equipment and the abnormal temperature inside the equipment, identify the suspected fire location in time, analyze whether there is a fire point by the Pingtai expert system, and whether the linkage firefighting system is needed; after confirming the fire point Send the fire alarm to the local monitoring platform, and at the same time, the patrol robot drives away from the safe distance (the robot bears the highest temperature) for observation. Cooperate with gas detection equipment to detect harmful gas in distribution room and switch room and provide reference for personnel to enter the site for firefighting or other operations.

Reputation is the soul of an enterprise and quality is the life of an enterprise. Based on the principle of 'sincere cooperation, mutual benefit and win-win', our company has made unremitting efforts to provide high-quality Pipe Inspection Videoscope Camera with 23mm Camera Lens, 7'' LCD and 20m Testing Cable and intimate services to customers. On the basis of absorbing advanced technology and technology at home and abroad, and integrating the wisdom and experience of scientific researchers, the stability and reliability of our products are at the leading level in the industry. We always uphold the dedication of quality products and sincere service of customer standards to meet client service needs at anytime and anywhere.

Hot Tags: mobile security robot, China, manufacturers, suppliers, wholesale, custom, high quality, Integrated Mecanum Wheel Module, Integrated Robot Joint Module, Ml itary Patrol Robot, Small Mobile Robot, Remote Control Mobile Robot, Mobile Robot