UV Disinfection and Spray Sterilization Robot
Product Introduction
In order to make our company a leading manufacturer of Automatically Checks Patrol Robot, Digital Servo Driver, Hospital Disinfection Robot and to achieve our common goals, we take quality first, customer first, and social responsibility as our company's values. For many years, we have been adhering to the business philosophy of 'technological innovation, honest service, and steady development', and take the service idea of 'customer requirements as our duty, quality for survival, reputation for development' as our goal! We always follow the principle of good quality and customer first to vigorously develop glass production, and we are willing to develop together with customers at home and abroad to create a harmonious and beautiful future! If you give us a list of products you are interested in, along with makes and models, we can send you quotations.
RoboCT UV sterilization robot integrates two disinfection and sterilization methods of UV and air filtration. By destroying the molecular structure of DNA (deoxyribonucleic acid) and RNA (ribonucleic acid) of microbial cells, it causes the death of growth cells and / or regenerative cells, so as to achieve the effect of sterilization and disinfection. At the same time, combined with autonomous navigation and dynamic obstacle avoidance functions, the robot can achieve large space, intelligent, autonomous, multi track, fixed-point timing killing.
1、Product features
1. Strong sterilization and disinfection ability
2. Large workspace
3. Make use of self moving chassis to realize unmanned work
4. Wide range of sterilization, no harmful residue
2、Application scenario
1、Medical institutions: isolation bed, operating room, waiting room
2、Transportation hub: airport, railway station, bus station
3、Enterprise unit: office area, public area
4、Building area: Community Service Center, public corridor
5、Consumption place: Hotel, restaurant, KTV, shopping mall, cinema
3、Product parameters
Technical items | technical requirement |
Appearance design | 1. Shell: PC + ABS, stainless steel, easy to wipe, antibacterial 2. Size: 540mm * 580mm * 1740mm |
Hardware parameters | 1. Processor: integrated Intel ® J1900 quad core processor 2.0GHz Chipset: Intel ® Bay trail SOC chipset 2. Autonomous navigation: no less than 3 kinds of sensors (LIDAR / odometer / gyroscope) can be used Multi-sensor fusion navigation scheme based on 3. Intelligent obstacle avoidance: the robot can avoid obstacles flexibly and avoid obstacles normally under low light conditions 4. Motor torque 8.1nm (high load, low power consumption) 5. The chassis adopts shock absorption suspension system, which can effectively guarantee the stability of chassis operation |
Operating parameters | 1. Movement speed: 0.45m/s (in navigation state) 2. High precision laser positioning, laser measurement accuracy: ± 2cm 3. Steering performance: 360 °, 0 radius turning 4. Regular working hours ≥ 4 hours 5. Be able to move autonomously to achieve autonomous navigation, obstacle avoidance and other functions 6. During the robot's task execution, it supports the pause mode, and can continue to execute without ending after resuming task 7. The robot can control the automatic switch of the electric door through the Internet of things 8. Support the expansion of elevator control scheme, and realize multi floor operation across regions 9. There is no need to make secondary transformation to the environment, no need to install route and positioning mark device, and the robot is in operation Autonomous Navigation 10. The robot has the function of automatic recharging, which supports the automatic recharging of low power and can perform tasks circularly 11. Support the automatic detection in the working area, and automatically turn off the ultraviolet lamp irradiation after detecting the personnel |
4、Factory and qualification
5、Precautions
(precautions)
-Avoid placing the machine in a wet place, and a large amount of water vapor will enter the motor components through the gap.
-When you stop working, please turn off the power of the motor, safety first.
-Do not use in dusty places.
(instructions for regular maintenance)
-Wipe the surface of perpendicularity adjusting part to avoid affecting the accuracy.
-Adjust the verticality adjusting parts regularly to ensure that the tire is in a vertical state.
-Before each start-up, the sundries within the operation range of the machine must be removed with an air gun, the power supply must be connected, the machine must be started, and the operation condition of the machine must be checked.
-Check whether the fastening screws are loose.
-If the machine is not used for a long time, please wipe it clean and put it in a dry and ventilated environment. Do not store it in a place with high temperature and humidity.
--Every season, the motor bearing needs to be replaced with oil to ensure that the motor runs without resistance.
-Every season, the oil of shock absorption bearing needs to be changed to ensure the smooth running of tire.
6、 After sales service
1. Our company can provide installation, debugging and technical training for all our products.
2. After the installation and commissioning, the warranty period is one year (except for vulnerable parts and artificial damage), with a lifetime warranty.
3. Irregular on-site maintenance, on-site operation and technical training.
4. After sales contact: 0571-89167832.
5. Service content: in case of equipment failure, first communicate by phone. If the problem cannot be solved, our company will rush to the site as soon as possible to solve the problem. After sales service includes not only equipment maintenance, but also technical support. Our technicians can carry out on-site technical training and provide a complete set of solutions. Professional and technical personnel shall follow up the use of user's equipment at any time.
We hope that through the success of our UV Disinfection and Spray Sterilization Robot, we can drive innovation and lead the development of the industry. Our goal is to provide professional services to improve product quality, effectively control production costs and enhance product competitiveness. We are able to also offer you with free of charge samples to meet your requirements.
Hot Tags: uv sterilization robot, China, manufacturers, suppliers, wholesale, custom, high quality, Main Control Module, ROV Motor Driver, Hyper Light Disinfection Robot, Articulated Robot Joint Kit, Vibration Sensor, Wheeled Mobile Robot
[[ProKeywords]]SPEC DATA
Send Inquiry