UV Intelligent Disinfection and Sterilization Robot
Product Introduction
Our company has strong new product development ability and fast response ability and advanced international design concept, we closely follow the development of new technology in the world, and launch all kinds of high performance and high reliability Mobile Robot With Arm, Gps Mobile Robot, UVD Robot. We have advanced production line equipment, strong technical force, perfect enterprise management and high-quality after-sales service to ensure quality and timely delivery. Sincere cooperation with you, altogether will create happy tomorrow! We are looking forward to receiving your inquiry. We always adhere to the business philosophy that social value is higher than corporate value, and customer's value is higher than profit.
RoboCT UV sterilization robot integrates two disinfection and sterilization methods of UV and air filtration. By destroying the molecular structure of DNA (deoxyribonucleic acid) and RNA (ribonucleic acid) of microbial cells, it causes the death of growth cells and / or regenerative cells, so as to achieve the effect of sterilization and disinfection. At the same time, combined with autonomous navigation and dynamic obstacle avoidance functions, the robot can achieve large space, intelligent, autonomous, multi track, fixed-point timing killing.
1、Product features
1. Strong sterilization and disinfection ability
2. Large workspace
3. Make use of self moving chassis to realize unmanned work
4. Wide range of sterilization, no harmful residue
2、Application scenario
1、Medical institutions: isolation bed, operating room, waiting room
2、Transportation hub: airport, railway station, bus station
3、Enterprise unit: office area, public area
4、Building area: Community Service Center, public corridor
5、Consumption place: Hotel, restaurant, KTV, shopping mall, cinema
3、Product parameters
Technical items | technical requirement |
Appearance design | 1. Shell: PC + ABS, stainless steel, easy to wipe, antibacterial 2. Size: 540mm * 580mm * 1740mm |
Hardware parameters | 1. Processor: integrated Intel ® J1900 quad core processor 2.0GHz Chipset: Intel ® Bay trail SOC chipset 2. Autonomous navigation: no less than 3 kinds of sensors (LIDAR / odometer / gyroscope) can be used Multi-sensor fusion navigation scheme based on 3. Intelligent obstacle avoidance: the robot can avoid obstacles flexibly and avoid obstacles normally under low light conditions 4. Motor torque 8.1nm (high load, low power consumption) 5. The chassis adopts shock absorption suspension system, which can effectively guarantee the stability of chassis operation |
Operating parameters | 1. Movement speed: 0.45m/s (in navigation state) 2. High precision laser positioning, laser measurement accuracy: ± 2cm 3. Steering performance: 360 °, 0 radius turning 4. Regular working hours ≥ 4 hours 5. Be able to move autonomously to achieve autonomous navigation, obstacle avoidance and other functions 6. During the robot's task execution, it supports the pause mode, and can continue to execute without ending after resuming task 7. The robot can control the automatic switch of the electric door through the Internet of things 8. Support the expansion of elevator control scheme, and realize multi floor operation across regions 9. There is no need to make secondary transformation to the environment, no need to install route and positioning mark device, and the robot is in operation Autonomous Navigation 10. The robot has the function of automatic recharging, which supports the automatic recharging of low power and can perform tasks circularly 11. Support the automatic detection in the working area, and automatically turn off the ultraviolet lamp irradiation after detecting the personnel |
4、Factory and qualification
5、Precautions
(precautions)
-Avoid placing the machine in a wet place, and a large amount of water vapor will enter the motor components through the gap.
-When you stop working, please turn off the power of the motor, safety first.
-Do not use in dusty places.
(instructions for regular maintenance)
-Wipe the surface of perpendicularity adjusting part to avoid affecting the accuracy.
-Adjust the verticality adjusting parts regularly to ensure that the tire is in a vertical state.
-Before each start-up, the sundries within the operation range of the machine must be removed with an air gun, the power supply must be connected, the machine must be started, and the operation condition of the machine must be checked.
-Check whether the fastening screws are loose.
-If the machine is not used for a long time, please wipe it clean and put it in a dry and ventilated environment. Do not store it in a place with high temperature and humidity.
--Every season, the motor bearing needs to be replaced with oil to ensure that the motor runs without resistance.
-Every season, the oil of shock absorption bearing needs to be changed to ensure the smooth running of tire.
6、 After sales service
1. Our company can provide installation, debugging and technical training for all our products.
2. After the installation and commissioning, the warranty period is one year (except for vulnerable parts and artificial damage), with a lifetime warranty.
3. Irregular on-site maintenance, on-site operation and technical training.
4. After sales contact: 0571-89167832.
5. Service content: in case of equipment failure, first communicate by phone. If the problem cannot be solved, our company will rush to the site as soon as possible to solve the problem. After sales service includes not only equipment maintenance, but also technical support. Our technicians can carry out on-site technical training and provide a complete set of solutions. Professional and technical personnel shall follow up the use of user's equipment at any time.
Our mission is to become an innovative supplier of high-tech digital and communication devices by providing value added design, world-class manufacturing, and service capabilities for UV Intelligent Disinfection and Sterilization Robot. Our company guarantees that the products are the lowest price in the same industry and also guarantees the quality. We do not replace the inferior products with the best ones and adher to the principle of 'do cheap good goods'. We pursue the company's objective of producing first-class products and delivering satisfactory services, and we strive to enhance the culture of high-quality talent.
Hot Tags: uv sterilization robot, China, manufacturers, suppliers, wholesale, custom, high quality, AC Servo Motor Driver, Autonomous Mobile Robot, Mecanum Omnidirectional Wheel, Gps Mobile Robot, Patrolling Patrol Robot, Patrol Robot
[[ProKeywords]]SPEC DATA
Send Inquiry