Brushless DC Motor for Deep Water Motor/Remotely Operated Vehicle/Rov Robot/Submersible Motor/Special Potting Motor/Diving Motor

With rigorous attitude and R&D technology, our company continuously applies new ideas and technologies to Mecanum Omni Wheel, Amr Automated Mobile Robot, Disinfection Mobile Robot. Our company adheres to the needs of users as the core and always firmly believes that technology and innovation can keep the enterprise young and vigorous forever. We are eager to work with you to pursue higher and better. When you are keen on any of our items following you view our product list, please feel free to make contact with us for inquiries.

Product introduction

1. Product features

Main features of joint ROV motor:

1. 1. High integration: less overall structural parts, integrating power, transmission and braking

1. 2. High precision control: high speed response, precise positioning, anti-interference;

1. 3. No brush: stable operation, low operation noise, high efficiency and energy saving, long service life;

1. 4. Each wheel has a separate ROV motor drive, which can realize four-wheel drive.

2. Application scenarios

The ROV motor can provide power for various machines. For example, ship blade, Mecanum wheel, crawler, etc., meet the needs of different industries such as industry, scientific research, commerce, medical treatment, etc., with wide application, stable quality and large shipment.

3. Parameter table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Product details

5. Factory and qualification

6. Instructions and precautions

Precautions

1. Check whether the power supply voltage is appropriate before using the new machine (over-voltage may cause damage to the drive module);

2. Do not connect the + / - polarity of DC input wrongly, and check whether the ROV motor model or current setting value on the drive controller is appropriate (not too large at the beginning);

3. Check whether the control signal line is firmly connected, and it is better to do so on the industrial site Consider the shielding problem (such as using twisted pair);

4. Do not connect all the wires to be connected at the beginning, only connect them to the most basic system, and then connect them gradually after the operation is good. Be sure to make sure the grounding method is clear or use floating air instead of connecting. Within half an hour after the start of operation, closely observe the state of the ROV motor, such as whether the movement is normal, sound and temperature rise, and immediately stop the machine for adjustment if any problem is found.

5. Regularly check the servo ROV motor gear and change the oil in time in case of wear and aging. Use less mineral lubricating oil for servo ROV motor lubrication. It is better to use ceramic lubricating oil to avoid deterioration and easy fracture of plastic gear.

6. Regularly check the vibration proof washer of the servo ROV motor. The aging and falling of the vibration proof washer will cause the vibration instrument failure of the servo ROV motor. Do not over lock the washer when installing the servo ROV motor, which will cause the deformation of the vibration proof washer.

7. No waterproof and dustproof ROV motor, please avoid water or dust running into the machine.

8. Do not change the power supply voltage at will, for example, 4.8V for receiver, 6.0V for improving the performance of servo ROV motor to avoid excessive load of servo ROV motor and determine the torque according to the nature of work and the length of swing arm.

Instructions for regular maintenance

1. The interior of the ROV motor shall be inspected regularly and carefully every month, and the dust shall be blown away with a hand-held air box.

2. Check the insulation resistance value every month. If it is found that the insulation resistance value drops, clean up the pollutants on the coil before continuing to use.

3. When the thermal protection and short circuit protection of the ROV motor act continuously, the source of the fault shall be identified, and the fault can be used only after it is eliminated.

4. Clean the air duct blocked by dust and the polluted stator winding every month, which will reduce the heat dissipation, make the ROV motor overheat and reduce the work safety.

5. Retighten the interface screws inside the hub ROV motor or replace the screws quarterly.

We sincerely welcome customers to quickly feedback their ideas and information to us, so that our Brushless DC Motor for Deep Water Motor/Remotely Operated Vehicle/Rov Robot/Submersible Motor/Special Potting Motor/Diving Motor will keep improving and these will become the cornerstone of our common long-term development. Our company has built a business system that combines globalization and localization. The main intention of our firm is to build up a satisfying memory for all consumers, and set up a long-term win-win small business connection.

Hot Tags: ROV motor, China, manufacturers, suppliers, wholesale, custom, high quality, Mobile Welding Robot, Automation AGV Robot, Portable Disinfection Robot, Differential Wheel HUB Motor, Pressure Sensor, Collaborative Mobile Robot