Dlpo Automatic Portable UV Light UV Sterilizer Phone Disinfection Box UV Robot

After experiences and improvements in the long run, our AC Servo Motor Driver, Hospital Disinfection Robot, Temp Sensor has a broad range of application values. You can buy the products with high cost performance by virtue of our unique characteristics and value awareness in the sales process. We warmly welcome clients, enterprise associations and mates from all over the globe to speak to us and find cooperation for mutual rewards. While we emphasize product quality, we also actively communicate with customers, understand customer needs, find out our shortcomings and provide professional and timely after-sales service for customers.

RoboCT UV Disinfection Robot is specially designed for indoor commercial scenes, which can meet the needs of all-round medical disinfection and sterilization on the ground and facade. Based on the robot full scene mobile full stack technology, RoboCT UV Disinfection Robot effectively integrates the UV disinfection and sterilization spotlight module, ultrasonic disinfectant atomization and spraying system, and wet drag dust pushing ground cleaning function. It is widely used in artificial / natural stone ground and other hard ground, which can protect the ground from corrosion. At the same time, the ladder control function endows it with the ability to travel freely between floors. The hydropower integration workstation realizes unlimited endurance for it, and reduces the manual intervention to the greatest extent. Medical level standard RoboCT UV Disinfection Robot will meet your higher standards of environmental health and safety needs.

1、 Spray disinfection robot features  

*Original high-efficiency filtration, high-frequency cold light LED, photocatalyst three disinfection methods, high efficiency, safety, environmental protection;

*The original imported photocatalyst technology is used to disinfect, sterilize and remove peculiar smell, and the negative ion air cleaning technology is used;

*Automatic monitoring, automatic alarm, fault prompt;

*The air inlet is surrounded by many sides, and the effect of purification and disinfection is better.

2、UV Disinfection Robot application scenarios

UV Disinfection Robot can be used in stations, airports, subways, shopping malls, communities with large flow of people. UV Disinfection Robot can also replace medical staff to disinfect wards and isolation areas. Operating room, clean ward, ICU ward of various types, ambulance, outdoor emergency room, mobile operating room isolation ward, burn ward, delivery room, waiting room, neonatology department, hemodialysis room, emergency department, pediatric disinfection supply center, infectious disease department, high-grade inpatient ward, examination room, injection room, dressing room, diagnosis and treatment room, etc

3、Serial number

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers. 

4、Factory and qualification

5、 Instructions and precautions

 (1) Irradiation mode: it is better to use portable ultraviolet sterilizer for short distance mobile irradiation, or ultraviolet lamp suspension type irradiation. Small items can be placed in ultraviolet disinfection box for irradiation.            

(2) Irradiation dose and time: different kinds of microorganisms have different sensitivities to ultraviolet rays. When disinfecting with ultraviolet rays, the irradiation dose must be used to kill the target microorganisms.         

The results showed that the irradiation dose should reach 10000 uw.s/cm2 when killing common bacterial propagules; 100000 uw.s/cm2 for killing bacterial spores; the resistance of virus to ultraviolet rays was between the bacterial propagation and spores; the resistance of fungal spores was stronger than that of bacterial spores, and sometimes it was necessary to irradiate to 600000 When the target microorganism of disinfection is unknown, the irradiation dose should not be less than 100000 UW. S / cm2.            The irradiation dose is the product of the irradiation intensity and the irradiation time of the ultraviolet lamp on the surface of the irradiated object. Therefore, the irradiation time can be calculated according to the irradiation intensity of ultraviolet light source. For example, the ultraviolet surface sterilizer with the radiation intensity of 70 UW / cm2 is used to irradiate the surface of the object at a short distance; the selected irradiation dose is 100000 uw.s/cm2; the irradiation time is as follows:           

 100000 UW. S / cm2 △ 70 UW / cm2 = 24 minutes.

Our merchandise are commonly recognized and reliable by customers and can meet constantly developing economic and social desires for Dlpo Automatic Portable UV Light UV Sterilizer Phone Disinfection Box UV Robot. Through continuous innovation and reform, our professional service team integrating 'planning, design, production, packaging and distribution' has been created. Relying on professional R&D technology, diversified and high-quality products and fast and thoughtful service system, our company continues to meet and exceed the growing needs of customers.

Hot Tags: uv disinfection robot, China, manufacturers, suppliers, wholesale, custom, high quality, ROV Motor, Intelligent Module, Medical Disinfection Robot, Cooperative Robot, Dtmf Controlled Robot, Electric Brushless Motor