Industrial Robotic Arm 4 Axis Robot Arm for Stamping Machine

We have our own production base to ensure the production and quality standards of our HUB Motor, Main Control Module, Brushless Permanent Magnet Motor, and our business is thriving after years of unremitting efforts. Welcome to set up long-term relationship with us. If you are interested in our products or you have special requirements, please call or write to us, and we will give you a quick and satisfactory answer. We have introduced and are making full use of internationally advanced technology and equipment, with advantages of skilled workers. Our company has the team and the innovation practical work spirit which upliftings, forwards furiously in the market economy flood tide!

Product introduction

1. Product features

1. 1. High degree of automation: the circuit can be designed by the computer or the induction magnetic strip of the magnetic air sensor can guide the passage and automatically charge;

1. 2. The manipulator rotates 360 degrees without dead angle, with high precision control;

1. 3. Stable operation, stable parking, no vibration and noise;

1. 4. Improve the corporate image: AGV has a futuristic appearance, beautiful appearance and high observability;

1. 5. Low cost,

1. 6. High working efficiency: shorten working hours without manual management, so as to improve enterprise efficiency.

1. 7. You can choose whether to configure the latent AGV or not.

2. Application scenario

It can be used in automatic chemical plants, post offices, warehouses, libraries, docks, airports, mobile robots, warehousing and logistics robots, coffee shops, planting greenhouses and other work platforms to meet the needs of different industries such as warehousing, manufacturing, logistics, agriculture, etc., with a wide range of applications, stable quality and large shipment volume.

3. Parameter Table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Factory and qualification

5. Instructions and precautions

5. 1. Electric shock hazard, this equipment must be connected with the power supply under the condition of protective grounding.

5. 2. Equipment susceptible to magnetic field interference shall not be placed near the cooperative robot, which may cause interference to it.

5. 3. The cooperative robot is limited to driving on flat ground, please keep away from the steps.

5. 4. When the manipulator moves close to the boundary of the motion range, its attitude cannot be specified arbitrarily.

5. 5. In the cylinder space directly above and below the base of the mechanical arm, it is necessary to avoid moving the tool to the cylinder space as much as possible, which will cause a joint to move too fast when the speed of the tool is very slow, thus causing the robot to activate the automatic protection mechanism.

6. Instructions for regular maintenance

6. 1. Before each start-up, the sundries within the operation range of the machine shall be removed with an air gun, the power shall be connected, the machine shall be started, and the operation condition of the machine shall be checked.

6. 2. If the machine is not used for a long time, please wipe it clean and put it in a dry and ventilated environment. Do not store it in a place with high temperature and humidity.

6. 3. Check whether the front and rear wheel parts are normal or whether there is abnormal sound every week

6. 4. Whether the stability of chassis frame is normal every week

6. 5. Check whether the wheel roller can rotate normally every month

6. 6. Check whether the MAG sensor of AGV car is sensitive and the position is correct every month

6. 7. Check whether the fastening screws are loose every month.

6. 8. Check the emergency stop button every year to make sure it can be used normally. 9. Recalibrate the zero position of the mechanical arm every year.

We have a mature process and modern management mode, and are committed to the development of Industrial Robotic Arm 4 Axis Robot Arm for Stamping Machine market. We continue to improve professional services to meet various needs of customers. We sincerely hope to build business relationship with you on the basis of mutual benefit and profit in the very near future. In the future, we will continue to adhere to the "customer-centric" philosophy, uphold the values of "sincerity and focus", and continue to work hard to provide customers with better and more considerate services.

Hot Tags: cooperative robot, China, manufacturers, suppliers, wholesale, custom, high quality, 36v Brushless Motor, DC Servo Motor, Disinfection Robot For Room, Night Vision Patrolling Robot, Robot Joint Actuator, Temp Sensor