Intelligent Autonomous Navigation Automatic UV Medical Disinfection UVC Robot

Our company strives to become a leading enterprise in the 36v Brushless Dc Motor, Hybrid Servo Stepper Motor, Mecanum Robot Module industry based on the tenet of winning the market with high-quality products and winning customers with a first-class after-sales service system. We recognize that if we are going to continue to survive and develop, we have to create our own brand benefits and rely on technology to develop products independently. We stick to the corporate culture concept of 'legal, positive, low-key, pragmatic, grateful, sharing, giving, and patriotic'. We warmly welcome you to visit our company and make cooperation. We are likely to be content to offer you a quotation up on receipt of your detailed needs.

RoboCT UV Disinfection Robot is specially designed for indoor commercial scenes, which can meet the needs of all-round medical disinfection and sterilization on the ground and facade. Based on the robot full scene mobile full stack technology, RoboCT UV Disinfection Robot effectively integrates the UV disinfection and sterilization spotlight module, ultrasonic disinfectant atomization and spraying system, and wet drag dust pushing ground cleaning function. It is widely used in artificial / natural stone ground and other hard ground, which can protect the ground from corrosion. At the same time, the ladder control function endows it with the ability to travel freely between floors. The hydropower integration workstation realizes unlimited endurance for it, and reduces the manual intervention to the greatest extent. Medical level standard RoboCT UV Disinfection Robot will meet your higher standards of environmental health and safety needs.

1、 Spray disinfection robot features  

*Original high-efficiency filtration, high-frequency cold light LED, photocatalyst three disinfection methods, high efficiency, safety, environmental protection;

*The original imported photocatalyst technology is used to disinfect, sterilize and remove peculiar smell, and the negative ion air cleaning technology is used;

*Automatic monitoring, automatic alarm, fault prompt;

*The air inlet is surrounded by many sides, and the effect of purification and disinfection is better.

2、UV Disinfection Robot application scenarios

UV Disinfection Robot can be used in stations, airports, subways, shopping malls, communities with large flow of people. UV Disinfection Robot can also replace medical staff to disinfect wards and isolation areas. Operating room, clean ward, ICU ward of various types, ambulance, outdoor emergency room, mobile operating room isolation ward, burn ward, delivery room, waiting room, neonatology department, hemodialysis room, emergency department, pediatric disinfection supply center, infectious disease department, high-grade inpatient ward, examination room, injection room, dressing room, diagnosis and treatment room, etc

3、Serial number

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers. 

4、Factory and qualification

5、 Instructions and precautions

 (1) Irradiation mode: it is better to use portable ultraviolet sterilizer for short distance mobile irradiation, or ultraviolet lamp suspension type irradiation. Small items can be placed in ultraviolet disinfection box for irradiation.            

(2) Irradiation dose and time: different kinds of microorganisms have different sensitivities to ultraviolet rays. When disinfecting with ultraviolet rays, the irradiation dose must be used to kill the target microorganisms.         

The results showed that the irradiation dose should reach 10000 uw.s/cm2 when killing common bacterial propagules; 100000 uw.s/cm2 for killing bacterial spores; the resistance of virus to ultraviolet rays was between the bacterial propagation and spores; the resistance of fungal spores was stronger than that of bacterial spores, and sometimes it was necessary to irradiate to 600000 When the target microorganism of disinfection is unknown, the irradiation dose should not be less than 100000 UW. S / cm2.            The irradiation dose is the product of the irradiation intensity and the irradiation time of the ultraviolet lamp on the surface of the irradiated object. Therefore, the irradiation time can be calculated according to the irradiation intensity of ultraviolet light source. For example, the ultraviolet surface sterilizer with the radiation intensity of 70 UW / cm2 is used to irradiate the surface of the object at a short distance; the selected irradiation dose is 100000 uw.s/cm2; the irradiation time is as follows:           

 100000 UW. S / cm2 △ 70 UW / cm2 = 24 minutes.

We are committed to innovation, manufacturing new and excellent Intelligent Autonomous Navigation Automatic UV Medical Disinfection UVC Robot and strive to provide customers with effective solutions. At the same time, some raw materials can be modified according to customers' special requirements. We hope that in the process of cooperation with customers, our customers can get a happy experience. Welcome all business friends to visit our company and wish a happy cooperation.

Hot Tags: uv disinfection robot, China, manufacturers, suppliers, wholesale, custom, high quality, Logistics Robot, Remote Control Mobile Robot, Medical Disinfection Robot, Leadshine Servo Driver, High Speed Brushless Dc Motor, 20a Current Sensor