Low Noise NEMA23 2 Phase DC 24/36c Closed Loop Step Stepper Stepping Motor Servo Driver for CNC

We will spare no effort to provide customers with reliable and innovative Brushless Motor Robotic Joint, Leadshine Servo Driver, Brushless Servo Driver products, and contribute to the success of customers as much as possible. We welcome new and old customers to come to consult & negotiate with us. Let us join hands to create a brilliant tomorrow!

Product introduction

1. Main features

1. 1. DC servo driver can accept signal rapidly and Quick response.

DC servo driver can adapt to changing load conditions immediately.

High performance fast function ring is a part of DC servo driver.

Besides, DC servo driver can achieve a performance feedback with real time.

1. 2. Stable and compatible.

DSP processing task of DC servo driver is designed professional. Process information will be more reliable and stable.

Fully compatible with mainstream rotating and direct drive motors.

1. 3. Safe and reliable

DC servo driver is good deal with reduce noise and additional hardware requirements.

Over voltage, current and temperature monitoring provides higher reliability.

2. Application scenarios

Lots of machine can use DC Servo driver to control their wheel. Such as packaging equipment, laser processing equipment, robots, automatic production lines, textile, pharmaceutical and other fields, to meet the needs of different industries such as industry, scientific research, business, medical apparatus and so on. Widely used, stable quality, large quantity of goods.

3. Parameter table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Product details

5. Factory and qualification

Instructions and precautions

Precautions

1. Please take protective measures against electric shock

2. For protecting DC servo driver from short circuit, it needs to be stored in a dry place.

3. Avoid large amount of dust entering the drive

4. Wear electrostatic bracelet to prevent electrostatic breakdown.

5. Crystal products may be damaged under certain conditions. For example, falling off the table or being impacted during the mounting process. If the product has been impacted, it is not recommended to continue to use it.

6. Exposure to radiation environment will cause damage to product performance.

7. Do not use or store these products in an environment where the pH range may cause corrosion or dissolution of products or packaging materials.

8. Do not use the product in halogen gas environment. Even a small amount of halogen gas, such as chlorine in the air or metal parts used for packaging, can cause corrosion. At the same time, do not use any resin that will release halogen gas.

9. Store in indoor environment with temperature not more than 35 ℃, relative humidity not more than 75%, and no corrosive gas

Instructions for regular maintenance

1. In order to prolong the working life of the servo system, the following problems should be paid attention to in the use process. For the use environment of the system, temperature, humidity, dust, vibration and input voltage should be considered. Clean the cooling and ventilation system of numerical control device regularly. Check whether the cooling fans on the numerical control device work normally. Inspection and cleaning shall be carried out every half a year or every quarter according to the environmental conditions of the workshop.

2. When the temperature in the numerical control device exceeds 5560 ℃ due to the high ambient temperature, the air conditioning device shall be installed in time. In addition to maintenance, the door of electrical cabinet shall be opened as little as possible. Because the dust and metal powder floating in the air in the workshop do not fall on the printed circuit board and electrical connector, it is easy to cause the insulation resistance between components to drop, thus causing failure or even damage to components.

3. When the CNC machine tool is idle for a long time, the CNC system should also be maintained regularly. First of all, the CNC system should always be powered on, and let it run without load when the machine is locked. In the rainy season with high air humidity, the power should be on every day, and the heating of electrical components can drive away the moisture in the numerical control cabinet, so as to ensure the stable and reliable performance of electronic components.

We thinks what prospects think, the urgency of urgency to act from the interests of a client position of theory, allowing for Low Noise NEMA23 2 Phase DC 24/36c Closed Loop Step Stepper Stepping Motor Servo Driver for CNC. We welcome new and outdated clients from all walks of daily life to get hold of us for long term organization associations and achieving mutual results! We always adhere to the customer first, attentively serves the demand group to move the user.

Hot Tags: DC servo driver, China, manufacturers, suppliers, wholesale, custom, high quality, Temp Sensor, Universal Servo Motor Driver, Photoelectric Sensor Module, Compound Robot, Photosensor Module, Autonomous Robot Platform