Wopson 360 Degree Pan Tilt Camera Inspection for Pipe Block

Our advancement depends on the superior gear, superb talents and consistently strengthened technology forces for Wheel HUB Motor, Photosensor Module, UV Bacteria Killing Robot. We have maintained a strong reputation in the industry for many years. We strongly believe that employees are the company's most valuable asset and that we are capable of attracting and retaining the best talent.

Product introduction of inspection robot

1. Product features

1. 1. Inspection robot High degree of automation: the circuit can be designed by the computer or the induction magnetic strip of the magnetic air sensor can guide the passage and automatically charge;

1. 2. Inspection robot Stable operation, stable parking, no vibration and noise;

1. 3. Inspection robot Improve the corporate image: AGV has a futuristic appearance, beautiful appearance and high observability;

1. 4. It has the functions of intelligent tracking, alarm, intercom, speed change, obstacle avoidance, etc.;

1. 5. Inspection robot High work efficiency: no manual management is needed to improve the efficiency of the enterprise;

1. 6. You can choose whether to configure the latent AGV or not in the inspection robot.

2. Application scenarios

As a branch of dangerous operation robot, inspection robot is mainly used in automatic chemical plant, mine and other places with certain danger.

3. Parameter Table

The above parameters are for reference only. Our product technology is constantly updated and upgraded. At the same time, we also accept the customization and development of customers.

4. Factory and qualification

5. Instructions and precautions

Precautions

1. The inspection robot is limited to driving on flat ground, please keep away from the steps.

2. When cleaning and maintaining the equipment, please disconnect the power supply first.

3. It is strictly forbidden for non-professionals to dismantle the machine

4. When using, do not cover the lens with cloth or other covers to prevent poor heat dissipation of the machine.

Instructions for regular maintenance

1. Before each start-up, the sundries within the operation range of the machine shall be removed with an air gun, the power shall be connected, the machine shall be started, and the operation condition of the machine shall be checked.

2. If the machine is not used for a long time, please wipe it clean and put it in a dry and ventilated environment. Do not store it in a place with high temperature and humidity.

3. Warm water or neutral detergent should be used for cleaning. Do not use gasoline, benzene or other chemical reagents. Wipe or air dry after cleaning.

4. Check whether the front and rear wheel parts are normal or whether there is abnormal sound every week

6. FAQ

What kind of Warning measures do you have in mobile security robot?

A: 1. Panoramic temperature measurement technology for internal equipment of switchgear

In the process of inspection, the inspection robot can read the temperature distribution data inside the installed switch cabinet and distribution cabinet in real time, realize the purpose of monitoring the working temperature status of all equipment, and fully grasp the working status of all equipment.

Partial discharge monitoring technology in the cabinet

The system uses the mechanical arm type partial discharge detector to detect the internal discharge phenomenon of all switch cabinets and distribution cabinets. Combined with the travel of the robot in the vertical direction of 2 meters and the travel of the partial discharge mechanical arm in the horizontal direction of 0.25 meters, it can realize the omni-directional partial discharge monitoring of switch cabinets and distribution cabinets.

Exception warning and linkage alarm handling

According to the operation conditions of power distribution room and switch room, alarms can occur according to different levels: robot local acousto-optic early warning, monitoring center acousto-optic early warning. When the environment gas reaches the alarm parameters, the fire and water are abnormal, the inspection point equipment is abnormal, the geological change, communication system failure, robot disconnection for 30 minutes and other abnormal conditions occur, the system will give an alarm. When the staff confirms the alarm information, the system can release the relevant alarm.

Fire detection and emergency treatment

Detect the abnormal light source and smoke in the distribution room and switch room through the high-definition video equipment carried by the inspection robot; identify the fire source by the infrared equipment, detect the open fire of the distribution room and switch room equipment and the abnormal temperature inside the equipment, identify the suspected fire location in time, analyze whether there is a fire point by the Pingtai expert system, and whether the linkage firefighting system is needed; after confirming the fire point Send the fire alarm to the local monitoring platform, and at the same time, the patrol robot drives away from the safe distance (the robot bears the highest temperature) for observation. Cooperate with gas detection equipment to detect harmful gas in distribution room and switch room and provide reference for personnel to enter the site for firefighting or other operations.

We always work as a tangible team to ensure that we can provide you with the best quality and the best price for Wopson 360 Degree Pan Tilt Camera Inspection for Pipe Block. Welcomes all abroad close friends and retailers to ascertain collaboration with us. From the beginning of product research and development to the transformation of the product into the application, the core team has made great efforts step by step.

Hot Tags: mobile security robot, China, manufacturers, suppliers, wholesale, custom, high quality, Remote Control Mobile Robot, Military Mobile Robot, 5 Channel Flame Sensor, Sanitation Disinfection Robot, 20a Current Sensor, Differential Wheeled Robot